Why Daewoo Vacuum Cleaner not turning on?
If your Daewoo Vacuum Cleaner fails to turn on, first ensure that the plug is fully inserted into the socket and that the socket is switched on. Also, check the fuse on the mains board; if it has tripped, reset it.
Why does my Daewoo TORNADO F1 Vacuum Cleaner have low suction?
If your Daewoo Vacuum Cleaner exhibits low suction or poor pick-up, several factors could be responsible. First, ensure that the cylinder is not full. Next, inspect the filters and clean them if they appear clogged. Check the hose for any blockages and clear them. Examine the belt for wear and replace it if needed. Finally, verify that the floor setting dial is correctly adjusted for your floor type.
What to do if my Daewoo TORNADO F1 Vacuum Cleaner is making a hissing sound?
If your Daewoo Vacuum Cleaner is making a hissing sound, it indicates restricted airflow. To resolve this, check for any blockages and clear them. Additionally, clean the filters to ensure proper airflow.
How to fix Daewoo TORNADO F1 Vacuum Cleaner that is hard to push?
If your Daewoo Vacuum Cleaner is difficult to push, it is likely set to the wrong height for your floor type. Adjust the floor setting dial as necessary to match your floor type.
General| Model | TORNADO F1 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Upright |
| Cordless | No |
| Weight | 5.5 kg |
| Filters | HEPA |
| Cord Length | 5 meters |
Detailed steps for removing, cleaning, and reinstalling the cylinder HEPA filter.
Procedure for safely replacing the vacuum cleaner's power plug and wiring.
To Next Page
