• When installing, do not give the transmitter too much
impact.
• Avoid using it in an environment with strong magnetic
field and high current, and do not combine the connection
wire with the power line.
• During installation, the wire should not be subjected to
pulling force and bending force.
• The wiring cannot be directly connected to the power
supply, and the load must be connected in series.
• For the transmitter with indicator lights, if the power of
the battery (battery) exceeds the maximum power, the
LED will be damaged, its life will also be considerably
reduced.
• If the power is below the specified range, the LED dims
or does not light.
• The transmitter must not come into contact with water.
• For use in such an environment, it can be covered with
a protective cover.
PRECAUTIONARY USE
To Next Page
Loading...
Need help?
General