INSTALLATION ON THE APPLICATION
1. After successfully installing your AM301 central to your
Daewoo Home Connect control app, you can add your
garage door contact.
To do this, click on Add an accessory and the General
tab then "add an accessory +" from the page of your
AM301 control unit.
2. Remove the security tab from your device and
separate the two parts of the contactor.
3. The application then detects your accessory, confirm
the addition.
4. Install your contactor within your home as shown
below.
INSTALL YOUR GARAGE DOOR SENSOR
Transmitter :
Inside, fixed to
the wall or on
the fixed side of
the garage door
Switch 2 :
Attached to your
garage door
Switch 1 :
Fixed to the ground
To Next Page
Loading...