DAF CF75 Series - Page 120

3
PNEUMATICALLY ASSISTED GEARBOX CONTROL
(SERVOSHIFT)
Removal and installation CF65/75/85 series
3-2
Installing Servoshift unit
1. Fit the Servoshift unit using a new gasket.
2. Tighten the attachment bolts (2) to the
specified torque. See “Technical data”.
3. Fit the banjo bolt for the air pipe (1) with
new sealing rings and tighten to the
specified torque. See “Technical data”.
4. Repressurise the air circuit and check the
operation of the Servoshift unit.
V300328
2
1
3
ᓻ 200337
https://www.truck-manuals.net/