3
AUTOMATIC GEARBOXES
Description of components CF65/75/85 series
2-2
Shift program selection
By pressing the “MODE” key briefly once,
another shift program can be selected when
stationary, but also when driving. Two selections
are possible:
Normal program:
This program is chosen automatically when the
vehicle ignition has been switched off. No
message is displayed. This program allows the
gearbox to change gear if necessary, so that
driving at higher engine speeds is possible. This
can be desirable on unpaved terrain.
Economy program:
The LED lights up on the selector display. This
program will, in general, change gear at
somewhat lower engine speeds. This results in
more economical fuel consumption.
↓ Change down
After the “D” key is selected and when the
vehicle is driving, this key can be used to keep
the gearbox in a lower gear. The selected gear
can be seen in the display. The gearbox will not
change up further until the “↑” or “D” key is
pressed. The number of gears that can be used
will appear in the display.
↑ Change up
This key is used to make the gearbox change up
to a higher gear. However, this is only possible
after previously selecting to stay in a low gear.
9
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
