3
CLUTCH
Inspection and adjustment CF65/75/85 series
4-4
5. Check that there is no leakage via the vent
opening (10).
Note:
A drop of oil on the vent opening (10) is
normal and is not a reason to replace the
clutch servo.
If there is constant leakage, the clutch servo
must be repaired or replaced.
If in doubt as to whether the clutch servo
situation is normal or whether there is a
leak, inspect the fluid level in the clutch
reservoir.
6. Depress the clutch pedal and check
whether there is a leak via the vent
opening (10).
7. On the clutch servos of the CF75/85 with
wear indicator check for leakage at the pin
through-feed. Depress the clutch pedal and
check whether there is an air leak via the
pin through-feed.
V300289
10
10
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
