3
CF65/75/85 series Inspection and adjustment
CLUTCH
4-3
4.2 INSPECTION, CLUTCH SERVO
Hydraulic fluid is toxic and can have
a damaging effect on your health.
Direct or indirect physical contact
should therefore be avoided.
As hydraulic fluid is also a
corrosive fluid, it may damage the
paintwork of the vehicle. Avoid any
contact between hydraulic fluid and
paintwork.
Always use new and clean hydraulic
fluid which has been kept in a
sealed container that meets the
specifications.
Hydraulic fluid which has absorbed
water (from the ambient air) may
have an adverse effect on the
operation of the clutch system.
Avoid any contact with mineral oil.
Even one drop of mineral oil in the
system will damage the seals.
1. Pressurise the air system.
2. Check for any air leakage via the clutch
servo bleed vent.
3. Depress the clutch pedal and check
whether there is any leakage via the clutch
servo bleed vent.
Note:
When the clutch pedal is released, the
clutch servo should bleed itself via this
bleed vent.
4. Depress the clutch pedal and check that
there is no leakage via the clutch servo
bleed vent.
10
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
