3
ZF INTARDER
Removal and installation CF65/75/85 series
4-10
4.7 REMOVAL AND INSTALLATION, OIL FILTER
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Removing the gearbox oil filter
1. Remove the attachment bolt (1) of the oil
filter.
M3052
1
2. Pull the filter cover with the filter from the
filter housing.
M3053
3. Remove the filter (3) from the filter
cover (2). Do not clean the filter. The filter
must always be replaced.
Note:
If the magnetic disk is still attached to the
back of the filter, separate it from the filter
element and fit it to the new filter element.
M3054
2
3
12
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
