3
CF65/75/85 series Removal and installation
ZF INTARDER
4-11
Installing the gearbox oil filter
1. Check the O-ring of the filter cover (2) for
any damage. Replace the O-ring if
necessary.
Grease the O-ring.
2. Grease the O-ring of the new filter (3) and
place the filter on the filter cover.
Then insert the filter and the filter cover into
the filter housing.
3. Use a plastic mallet to tap the filter cover
into the filter housing.
M3054
2
3
4. Tighten the attachment bolt (1) to the
specified torque. See “Technical data”.
M3052
1
12
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
