DAF CF75 Series - Page 394

3
ZF INTARDER
Removal and installation CF65/75/85 series
4-12
4.8 REMOVAL AND INSTALLATION, PROPORTIONAL VALVE
Removing the proportional valve
1. Remove the electrical wiring from the valve.
2. Remove the attachment bolts and remove
the proportional valve.
3. Remove the O-ring.
Installing the proportional valve
1. Fit a new O-ring on the proportional valve
and lightly grease the O-ring.
2. Install the proportional valve and tighten the
attachment bolts to the specified torque.
See “Technical data”.
3. Connect the electrical wiring to the valve.
V300011
ᓻ 200337
12
https://www.truck-manuals.net/