3
ZF INTARDER
Draining and filling CF65/75/85 series
6-4
Filling, gearbox (oil change)
ZF 16S-151/181/221
1. Clean the drain plugs and tighten them to
the specified torque. See “Technical data”.
2. Top up oil through level check/filler opening
(A) until the oil reaches the rim of the filler
opening (A).
3. After filling take a short test drive. Do not
activate the intarder during the test drive.
4. After the test drive, check the oil level. The
oil level must reach the rim of the level
check/filler opening (A).
5. Tighten the level check/filler plug to the
specified torque. See “Technical data”.
M3051
A
ZF AS Tronic
1. Clean the drain plugs and tighten them to
the specified torque. See “Technical data”.
2. Top up oil through level check/filler opening
(A) until the oil reaches the rim of the filler
opening (A).
3. After filling take a short test drive. Do not
activate the intarder during the test drive.
4. After the test drive, check the oil level. The
oil level must reach the rim of the level
check/filler opening (A).
5. Tighten the level check/filler plug to the
specified torque. See “Technical data”.
A
B
C
G000250
12
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
