DAF CF75 Series - Page 405

3
CF65/75/85 series Draining and filling
ZF INTARDER
6-5
Filling, gearbox (after repair or with a new
gearbox)
ZF 16S-151/181/221
1. Place the vehicle on a level surface.
2. Top up oil to the rim through the level
check/filler opening (A).
3. After filling take a short test drive. The
intarder must be briefly fully activated at
the beginning of the test drive.
4. After the test drive, check the oil level. The
oil level must reach the rim of the level
check/filler opening (A).
5. Tighten the level check/filler plug (A) to the
specified torque. See “Technical data”.
M3051
A
ZF AS Tronic
1. Place the vehicle on a level surface.
2. Top up oil to the rim through the level
check/filler opening (A).
3. After filling take a short test drive. The
intarder must be briefly fully activated at
the beginning of the test drive.
4. After the test drive, check the oil level. The
oil level must reach the rim of the level
check/filler opening (A).
5. Tighten the level check/filler plug (A) to the
specified torque. See “Technical data”.
A
B
C
G000250
12
ᓻ 200337
https://www.truck-manuals.net/