3
PTO
Disassembly and assembly CF65/75/85 series
5-6
7. Place a driving tool underneath the drive
sprocket.
V300648
8. Now press the prop shaft into the second
inner bearing and drive sprocket, which are
already in the PTO housing.
V300649
9. Place the mounting ring onto the prop shaft
and clamp it firmly into a vice. Now place
the PTO housing with prop shaft onto the
mounting ring.
10. Apply Loctite to the prop shaft lock nut and
tighten it to the specified torque. See
“Technical data”.
V300642
1
13
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
