3
TECHNICAL DATA
AS TRONIC gearbox CF65/75/85 series
13-2
13.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques.
Any other threaded connections that are
not specified must therefore be tightened to the
torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed unless stated otherwise.
Gearbox to engine
M8 attachment bolts - 10.9 30 Nm
M10 attachment bolts - 10.9 60 Nm
M12 attachment bolts - 10.9 110 Nm
Drive flange
Attachment bolts 120 Nm
Gearbox front cover
Attachment bolts 23 Nm
Sealant Loctite 574
Bearing cover
Attachment bolts, output shaft bearing cover 46 Nm
Sealant, output shaft bearing cover Loctite 574
Gearbox modulator
Attachment bolts 23 Nm
Bleeder 10 Nm
Clutch unit
Bleed screw 22 Nm
Compressed air connection 50 Nm
0
á“» 200337
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
