1-6
©
201426
EMERGENCY RESPONSE GUIDE
Securing the vehicle ΛΦ series
The automatic safety belt tensioner is fitted on the
rear side of the driver's and co-driver's seat.
Safety instructions
- Do not place any objects near undeployed
airbags
- Before any work is carried out on an airbag
system:
1. the ignition must be switched off.
2. the main switch must be turned off.
3. the battery clamp must be removed from
the negative pole.
4. wait at least 30 seconds.
- Never disconnect an electrical connector in
the airbag or safety belt tensioner circuits if
the electronic control unit is energised.
1 Safety belt tensioner
To Next Page
Loading...
Need help?
General
