DAHAO BECS-D16 User Manual

刺绣机电脑
Computerized Control System for Embroidery
Machine
BECS-D16
（General Unit）
Version：2017-01
操作手册
OWNER’S MANUAL

DAHAO BECS-D16 Specifications

General

Brand	DAHAO
Model	BECS-D16
Category	Sewing Machine
Language	English

Summary

Chapter 1 General Descriptions

1-1 Warnings and Cautions

Basic security prevention measures for fire, shock, and injury during operation, transport, and installation.

Chapter 2 Operation Instruction

2-1 Configuration and Direction of the Control Panel

2-7 Procedure of Embroidery

Outlines the basic steps involved in the embroidery process.

2-8 Normal Embroidery, Returning and mending

Details the procedures for normal embroidery, returning the frame, and mending.

2-11 Thread-breakage detection and mending switch

Explains the principles and types of thread-breakage detection systems.

2-12 System's Working Status

Chapter 3 Disk Management

3-1 Disk Selection

3-4 Design import

Provides instructions for importing design data from disk to machine memory.

3-5 Design Export

Guides users on how to output design data from system memory to disk.

3-7 Deleting Objects in Disk (Including Design Files and Folders)

3-8 Formatting a Disk

Provides instructions on how to format a disk, including warnings and procedures.

Chapter 4 Memory Design Management

4-2 Select object

4-3 Selecting a Design for Embroidery

Guides on selecting a new design and setting its parameters for embroidery.

4-6 Delete the memory design

4-7 Add applique design

Details the two methods for adding applique embroidery: manual and automatic frame moving.

4-15 Move frame to make design

4-18 Design parameters operation

4-20 Network Management Function

Describes the network management function for remote supervision and batch download.

Chapter 5 Management of Machine Parameters

5-1 Normal Parameters

Covers parameters like X&Y Scales, Rotate, Direction, Prior Mode, etc.

5-2 Setting of other embroidery parameters

5-3 Set User-defined parameter

5-4 Purview of Machine Parameter Manage

Details roles and access levels for parameter management (common user, admin, factory).

5-5 Initialize Parameters

5-6 Save all parameter to disk

Provides instructions on how to save all machine parameters to a disk.

5-7 Read all parameter from disk

Explains how to load machine parameters from a disk.

5-8 Adjust Parameters of X＆Y Servo Drivers

Details how to adjust X&Y servo driver parameters, requiring factory password.

Chapter 6 Assistant Operation

6-1 Assistant embroidery operation

Covers operations like resuming design start, saving start points, auto-positioning, and stitch stop down.

Chapter 8 Memory Design Edition

8-1 Start Editing Design

Enables editing common designs in memory or creating new ones.

8-2 Design Editing Operation

Covers operations for editing designs, including pattern display and document management.

Chapter 9 Letter Design

9-2 Input Char String and Basic Parameter

Details how to input character strings and adjust basic parameters for letter design.

9-3 Character Pattern Save

Chapter 10 JF Type Sequin Embroidery

10-1 Brief Introduction on Sequin Embroidery

10-2 Embroider sequin

Outlines the steps for embroidering sequins, including input, edit, and parameter settings.

10-3 Input sequin design

Guides on importing sequin designs, including setting numbers, names, and input ways.

10-4 Sequin design edition

Explains how to edit sequin designs and save them as special multi-sequin designs.

10-5 Parameter setting about multi-sequin embroidery

Details how to set parameters for debugging the sequin device and multi-sequin operations.

10-6 Change color order and set sequin mode

Guides on setting sequin mode and color-changing order for normal and special designs.

10-7 Manual operation of sequin embroidery

10-8 Debugging multi-sequin embroidery

10-9 Sequin mending

Chapter 13 Instruction on Operating High-Efficiency System

13-1 Descriptions of Parameters in High- Efficiency Mode

Explains parameters for high-efficiency mode: speed control, head numbers, and frame width.

13-2 Setting of Software for High-Efficiency Mode

Guides on updating software and initializing system parameters for high-efficiency mode.

Chapter 14 Updating Control Program

14-1 Update Data Software (Upper Machine)

Details the procedure for updating data software on the upper machine via USB.

14-2 Updating control program (Down Machine)

Explains how to update the control program on the down machine via USB.

Appendix Ⅰ Parameter Setting List

Magnify, Rotate& Repeat Setting

Set user-defined Parameter (set it according to needs)

Embroidery Assistant Parameters

Thread-breakage detection Parameter

Parameters related to detecting and responding to thread breakages.

Frame Parameter

Main shaft Parameter

Thread-trimming Parameter

Sequin Parameter(JF type)

Parameters specific to JF type sequin embroidery, including speed, angle, and modes.

Special Embroidery Parameter

Appendix Ⅴ Network Connection of Embroidery Machines

I、 Making Ethernet cable

II、 Notes for network setting parameters

III、 The ways to construct network

IV、 Setting the network parameters of embroidery machine

Guides on setting network parameters for embroidery machines: MAC, IP, server port, and IP address.