DAHAO BECS-D19 - Page 4

Contents
II
BECS-D19 User’s Manual
3.5 Pattern Output .................................................................................................................... 29
3.6 Directory Operation ........................................................................................................... 30
3.7 Delete Disk File (Including Pattern File and Directory) ................................................... 30
3.8 Disk Formatting ................................................................................................................. 31
Chapter 4 Memory Pattern Management .................................................... 33
4.1 Memory Pattern Management Interface and Other Instructions ....................................... 33
4.2 Select One or Several Patterns ........................................................................................... 37
4.3 Select Pattern for Embroidery ........................................................................................... 37
4.4 Pattern Preview .................................................................................................................. 37
4.5 Copy Memory Pattern ....................................................................................................... 39
4.6 Delete Memory Pattern ...................................................................................................... 41
4.7 Applique Pattern Setting .................................................................................................... 42
4.8 Satin Stitch Compensation ................................................................................................. 44
4.9 Edit Combined Pattern ....................................................................................................... 45
4.10 Devide Pattern ................................................................................................................. 47
4.11 Integrate Patterns ............................................................................................................. 47
4.12 Generate High-speed Pattern ........................................................................................... 48
4.13 Compile Combined Pattern ............................................................................................. 48
4.14 Generate Pattern by Parameters ....................................................................................... 49
4.15 Generate Pattern by Frame-moving ................................................................................. 50
4.16 Generate Outline Pattern from Normal Pattern ............................................................... 51
4.17 Copy Pattern of Varied Stitch Length .............................................................................. 52
4.18 Set Common Parameters ................................................................................................. 52
Chapter 5 Machine Parameter Management ............................................... 54