Dahua Technology DH-XVR1B16H-I User Manual

User’s Manual
57
Configure the settings for date and time parameters.
Parameter
Description
System Time
In the
System Time
box, enter time for the system.
Click the time zone list, you can select a time zone for the system, and the
time in adjust automatically.
Do not change the system time randomly; otherwise the recorded video
cannot be searched. It is recommended to avoid the recoding period or stop
recording first before you change the system time.
Time Zone In the
Time Zone
list, select a time zone for the system.
Date Format In the
Date Format
list, select a date format for the system.
Date Separator In the
Date Separator
list, select a separator style for the date.
Time Format
In the
Time Format
list, select
12-HOUR
or
24-HOUR
for the time display
style.
DST Enable the Daylight Saving Time function. Click
Week
or click
Date
.
Start Time
Configure the start time and end time for the DST.
End Time
NTP
Enable the NTP function to sync the Device time with the NTP server.
If
NTP is enabled, device time will be automatically synchronized with
server.
Serve Address
In the
Server Address
box, enter the IP address or domain name of the
corresponding NTP server.
Click
Manual Update, the Device starts syncing with the server
immediately.
Port The system supports TCP protocol only and the default setting is 123.
Interval
In the
Interval
box, enter the amount of time that you want the Device to
sync time with the NTP server. The value ranges from 0 to 65535.
5.1.4.4 Configuring Network Settings
You can configure the basic network settings such as net mode, IP version, and IP address of the Device.
You can also configure network settings by selecting
Main Menu > NETWORK > TCP/IP.
After you have configured the date and time settings, on the Date &Time page, click Next.

Dahua Technology DH-XVR1B16H-I Specifications

General

Brand	Dahua Technology
Model	DH-XVR1B16H-I
Category	DVR
Language	English