Do you have a question about the Dahua Technology DH-XVR1B16H and is the answer not in the manual?
| Aspect ratio | 16:9 |
|---|---|
| Certification | FCC: Part 15 Subpart B CE: CE-LVD: EN 60950-1/IEC 60950-1 CE-EMC: EN 61000-3-2, EN 61000-3-3, EN 55032, EN 50130, EN 55024 UL: UL 60950-1 |
| Product color | Black |
| Rack capacity | 1U |
| Playback modes | Fast, Next, Pause, Play, Previous, Repeat, Shuffle, Slow, Stop, Zoom |
| Backup function | Yes |
| Channels quantity | 16 channels |
| Multi-display modes | 4, 8, 9, 16 |
| Video capturing speed | 60 fps |
| Maximum recording time | 1 h |
| Audio formats supported | AAC, G.711, PCM |
| Network connection type | RJ-45 |
| Maximum video resolution | 3840 x 2160 pixels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| Analog signal format system | NTSC, PAL |
| Video capturing speed (PAL) | 30 fps |
| Playback resolutions supported | 3840x2160, 1920×1080, 1280×1024, 1280×720 |
| BNC input ports | 16 |
| BNC output ports | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Number of users | 128 user(s) |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Supported network protocols | HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter , DDNS, FTP, Alarm Server, P2P, IP Search |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| DC voltage | 12 V |
| Power supply type | DC |
| Power consumption (typical) | 10 W |
| Package weight | 1000 g |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 45 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Depth | 236 mm |
|---|---|
| Width | 260 mm |
| Height | 48 mm |
| Weight | 860 g |
Provides step-by-step instructions for installing a Hard Disk Drive.
Guides through first-time setup, including booting and basic initialization.
Explains how to reset the admin password if it is forgotten.
Guides users through initial configuration using a step-by-step wizard.
Details how to set up network parameters like IP address and DNS.
Explains how to adjust image parameters like brightness, contrast, and saturation.
Provides methods for adding remote devices, either automatically or manually.
Details SMD setup for detecting persons and vehicles.
Covers configuring and searching for detected human faces.
Explains IVS rules like Tripwire and Intrusion detection.
Allows scanning and assessing the device's security status.
Covers configuration of essential system services for security.











