Operation 8
There are six options (Check in, Break out, Break in, Check out, OT-In, and OT-Out)
displayed on the screen.
Select one of the six according to your requirement.
Step 2
Press OK/F4. Step 3
The attendance is checked.
Password
Press the user ID number on the keyboard. Step 1
Press OK/F4. Step 2
Enter the password. Step 3
Press OK/F4. Step 4
There are six options (Check in, Break out, Break in, Check out, OT-In, and OT-Out)
displayed on the screen.
Select one of the six according to your requirement. Step 5
Press OK/F4. Step 6
The attendance is checked.
Card
Swipe the card at the card reader below the fingerprint sensor to get your attendance checked.
Your user ID, name, card swiping time, attendance events will all be displayed on the screen.
See Figure 3-4.
Swipe card Figure 3-4
Press ∧/F2 or ∨/F3 continuously, BREAK OUT, CHECK IN, OT-OUT, OT-IN, CHECK OUT,
BREAK IN will be displayed in turn.
There are shortcut keys for check-in, check-out, break-in, and break-out.
Esc/F1: Press Esc/F1, CHECK IN will be displayed on the screen, and then you can
check-in by fingerprint, password, or card.
∧/F2: Press ∧/F2, BREAK OUT will be displayed on the screen, and then you can
make an attendance when you need to go out during work time by fingerprint,
password, or card.
∨/F3: Press ∨/F3, BREAK IN will be displayed on the screen, and then you can
make an attendance when you return to the company during the work time by
fingerprint, password, or card.
To Next Page
Loading...
