Dahua ASA4214F - System Operation; System Operation: Device Initialization

11
3 System Operation
 The operation involves fingerprint registration. For specific pressing method, please refer
to “附录 1 Fingerprint ”.
 The operation involves input method. For specific input method, please refer to “附录 2
Face Registration Instruction”.
3.1 Boot up
Plug in power, and press switch button on the left to boot up the device. The device displays a
white screen, and enters standby interface after 15s, as shown in Figure 3-2.
3.2 Device Initialization
Device initialization means to set admin, password and email during the first login. If the
password is not set, the platform will fail to add the device.
 “Admin” and “Password” are only used to add the device, without admin authority in
personnel management.
 If the admin password is forgotten, the password can be reset at the platform or ConfigTool
through Email.
 Password can be 8 to 32 non-null characters; it consists of capital letters, small letters,
numbers and symbols (except “'”, “"”, “;”, “:” and “&”). The password shall consist of 2 types
or over 2 types; “Input Password” and “Password Confirm” shall be the same. Please set a
high-security password according to password strength prompt.