Period: select preset access period. Please refer to “3.6.1 Period” for
details.
Card type: select card type.
Ordinary card
There is no limitation on number of times.
VIP card
There is no limitation on number of times. When the VIP
cardholder comes in, the software platform prompts service
personnel.
Guest card
There is limitation on number of times. This card will lose efficacy
beyond the number of times.
Patrol card
Swipe the patrol card anytime and record card-swiping info. It
cannot unlock the door successfully.
Blacklist card
There is no limitation on number of times. When the cardholder
comes in, the background prompts service personnel.
Duress card
There is no limitation on number of times. It can unlock normally,
but the system produces and uploads alarm info to management
center.
Number of times is only valid to guest card.
Valid period: set the valid period of access control.
Take a photo. When swiping a card, the screen displays the user’s
photo.
Department
Users check attendance according to department shift.
Shift
Department shift: check attendance according to the shift of
department where the user belongs to.
Personal schedule: check attendance according to personal
schedule. Please refer to “3.7.2.1 Personal Schedule” for details.
User Level
This authority is valid globally, not just valid to attendance management.
User: only have use authority.
Admin: login the system to configure.
Table 3-1
After parameter configuration is completed, press . 步骤3
The screen prompts “Do you want to save settings?”
Press [Yes] to save and complete configuration. 步骤4
To Next Page
Loading...
