20
3.6 Access
Manage the door by period, set unlock mode, alarm and status.
3.6.1 Period Management
Set unlock period, including card period, holiday period, mode period and normally open (NO)
period.
3.6.1.1 Period Config
The system supports a total of 128 periods ranging from 0 to 127. In every period, set daily
timetable from Sunday to Saturday; support to configure 4 periods every day.
During unlocking, the access judges whether the present time is within a period value. The
system only supports to enable access control within the set period; it is invalid in other time.
Select “Access > Period Management> Period Config”, and the screen displays Figure 步骤1
3-11.
Figure 3-11
Enter any number from 0 to 127 as period number and click . The screen displays 步骤2
Figure 3-12.
To Next Page
Loading...
