37
3.8.5 Face Detection Trigger Mode
Select “System >Face Detection Trigger Mode”, and the screen displays Figure 3-35. 步骤1
Figure 3-35
Select trigger mode according to actual needs, and press to save the setting. 步骤2
Motion: the screen displays “Face Recognition” interface when a moving object is
detected within the camera range and face recognition is triggered.
Proximity: the screen displays “Face Recognition” interface when infrared sensor
within 30cm～50cm range in front of the device is blocked and face recognition is
triggered.
Motion & proximity: it is suggested to be used indoors.
Only motion: it is suggested to be used outdoors.
3.8.6 Restore Factory
Data will be lost if restoring factory settings. Please operate cautiously.
Restore factory settings of the device; select to keep user info and log or not according to
needs.
Restore factory: restore all settings, including user settings. Device info and user info will
be cleared.
Restore factory (save user & log): after restoration, shift schedule will be cleared and shall
be configured again.
Select “System > Restore Factory”, and the screen displays Figure 3-36. Select the needed
mode and press [Yes].
To Next Page
Loading...
