42
Figure 3-41
According to actual situation, configure parameters by reference to Table 3-8. 步骤2
: turn off.
: turn off.
Press [Auto/Manual Mode], set corresponding period of every event,
and press to save. In standby interface, display corresponding
event according to the set time.
After this function is turned on, standby interface doesn’t display
default attendance event, but attendance event is forced to be
selected manually, in order to complete the verification. Press Fn key
to select and verify. Alternatively, verify first, and then select
attendance event.
After this function is turned on, select the event. Standby interface
displays the selected event, which cannot be modified manually.
Table 3-8
3.10.4 Fn Key Definition
Customize event name of Fn key.
Select “Features > Fn Key Definition”, and the screen displays Figure 3-42. 步骤1
To Next Page
Loading...
