53
Figure 3-59
According to system prompt, press your finger in fingerprint collection zone, and check 步骤2
whether fingerprint is displayed normally.
Press to exit FP test. 步骤3
3.13.5 Face
Select “Auto Test > Face”, and check whether face is detected.
3.13.6 Clock
Select “Auto Test > Clock”, and the screen displays Figure 3-60. 步骤1
Figure 3-60
Press “Start” or “Clear” to test whether the time is normal. 步骤2
Press to exit clock test. 步骤3
3.13.7 Auto Test
Select “Auto Test > Auto Test”, and the system starts auto test.
3.14 System Info
View data capacity, device version and firmware info.
At main interface, select “System Info” and the screen displays Figure 3-61.
To Next Page
Loading...
