19
Protocol Type
●
If the IP camera is added through private protocol, select
.
●
If the IP camera is added through ONVIF protocol, the select
,
,
, or
.
●
If the IP camera is added through other manufacturers, select
or
.
Encryption
If the IP camera is added through ONVIF protocol, enabling the
check box will provide encryption protection to the data being transmitted.
To use this function, the HTTPS function must be enabled for the remote IP
camera.
Step 4 Click OK.
1.6 Configuring Recorded Video Storage Schedule
By default, all cameras continuously record videos 24 hours a day. You can modify the settings as
needed.
You can also configure storage schedule in the Startup Wizard.
Procedure
Step 1 Select Main Menu > STORAGE > Schedule > Record.
Figure 1-19 Record schedule
Step 2 Configure parameters.
To Next Page
Loading...
Need help?
General