Need help?Do you have a question about the Dahua DH-XVR5104C-X1 and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| Analog Camera Input | 4 |
| HDCVI Camera Input | 4 |
| AHD Camera Input | 4 |
| TVI Camera Input | 4 |
| Recording Resolution | Up to 1080p |
| Video Output | 1 HDMI, 1 VGA |
| Display Interface | HDMI, VGA |
| OSD | Yes |
| Backup Mode | USB, Network |
| USB Interface | 2 USB 2.0 |
| Power Consumption | ≤ 10W |
| Channels | 4 |
| Main Processor | Embedded Processor |
| Audio In/Out | 1/1 |
| Record Rate | 25fps@1080P |
| Record Mode | Manual, Schedule, Motion |
| Record Interval | 1-60 minutes |
| Resolution | 1920 × 1080 |
| Multi-screen Display | 1/4 |
| Ethernet | 1x RJ45 |
| Network Functions | P2P, Cloud Service |
| Smart Phone | Yes (iOS, Android) |
| Interoperability | ONVIF |
| Search Mode | Time, Event |
| Playback Function | Yes |
| Internal HDD | 1 SATA, Up to 6TB |
| RS485 | Yes |
| Power Supply | DC12V/2A |
| Operating Conditions | -10°C to +55°C |
| Storage Conditions | -20°C to +70°C |
| Compression Format | H.264 |
| Network Interface | RJ-45 (10/100M) |
Lists essential cybersecurity practices for system security.
Provides instructions on how to install a Hard Disk Drive (HDD) in the device.
Guides through initial device setup, including booting, initialization, and password reset.
Manages remote devices by adding, initializing, modifying, and upgrading them.
Enables manual or automatic recording control and configures recording settings.
Provides functions for searching, playing back, and managing recorded videos.
Configures alarm settings for various events like video detection, system events, and abnormal conditions.
Features smart detection capabilities like SMD, face detection, and IVS rules.
Manages IoT devices, sensors, and configures alarm linkage for temperature and humidity data.
Connects to POS machines for transaction data and configures display settings.
Manages backup settings, including finding USB devices and backing up files.
Configures network settings, including TCP/IP, ports, Wi-Fi, 3G/4G, and P2P.
Manages user accounts, groups, ONVIF users, and security questions.
Manages storage resources, including basic settings, HDD manager, and quota.
Configures general, RS232, security, maintenance, and upgrade settings.
To Next Page