Dahua DHI-ARC3008C - DIP Switch

Alarm Control Panel Installer Manual
11
Grand tour Figure 1-3
Table 1-2 Function introduction
No.
Name
Function
1
DIP switch
Restores the factory settings. For details, see "1.5.3 DIP Switch."
2
Network port
Connects to Ethernet port.
3
LINK indicator
Network indicator.
4
ACTIVE indicator
Network indicator.
5
Z1–Z8
Zone 1–Zone 8
G
Ground.
6
+12V
Auxiliary power output 12V DC with 1000mA.
G
Ground.
7
ST
Tamper port, and generally used as siren tamper.
G
Ground.
SIREN
Connects to Siren.
8
NC, COM, NO
Relay port. The maximum touch point load is 0.5A 125V AC/1A
30V DC
9
OUT_1, OUT_2
Alarm output driven by MOS.
G
Ground.
10
VBAT
Positive pole and negative pole of battery. The negative pole