Dahua DHI-ARC3008C - Startup; Setting Keypad and Expansion Module Addresses; Setting Card Reader Address

Alarm Control Panel Installer Manual
14
DIP 5
DIP 6
Function
OFF
ON
Security code reset
ON
OFF
Supervisor code reset (default 1234)
ON
ON
Total reset (depends on settings in SYSTEM
FUNCTIONS menu)
OFF
OFF
Normal operation
After setting DIP 5 and DIP 6, to take the setting effect, move the DIP 8 to the ON position. Step 2
After rebooting is completed, the RS-485 light blinks three times. Then move the DIP 8 to the OFF
position.
Wiring 1.6
Wiring Figure 1-5