You can configure parameters and enter related information
for activators, modules, I/O, system, communication, digital
prompt, and log events.
Setting 1.45
In the Setting Module, you can configure parameters that are related to clients, utility, installers and
language. You can also get help in this part.
1.45.1 Client
In this section, you can search, manage, and configure parameters for clients.
1.45.1.1 Managing a Client
You can add new clients, modify, copy, and delete client information.
Adding a Client
Click New. Step 1
The New Client Profile interface is displayed. See Figure 1-48.
New client profile Figure 1-48
Enter client code, release time number, client number, address, city, state, and ZIP. Step 2
In the Controller Address area, enter the IP address and port. Step 3
Click Yes. Step 4
A new client is added.
Communication: Displays computer IP address and controller IP address and Port.
User Info: You can enter two users’ names, addresses, telephone numbers and more.
Client Note: You can record your operation histories.
To Next Page
Loading...
