Need help?Do you have a question about the Dahua DHI-ASGG520T and is the answer not in the manual?
This document is a user manual for a Tripod Turnstile, providing comprehensive information on its function, installation, operation, maintenance, and safety.
The turnstile is designed for access control in various settings such as hotels and government facilities. It regulates entry and exit by allowing people to pass using a card or face recognition, or freely without identity verification, or by disallowing passage altogether. The arms of the turnstile are normally locked and open only upon authorization, closing after a specified time or when a person has passed. It supports anti-trailing and anti-reverse intrusion functions, locking the arms if forced entry is attempted. The device can be integrated into a network for collecting and importing card and face data.
The turnstile operates on a 24 V DC/6.5 A power input for the control board. It includes an electromagnetic lock, an access control panel, a speaker for voice prompts, and a passage control panel that processes signals from the access controller and manages the electromagnets and direction indicator. Direction indicators show passing status with solid red X for standby, flashing green arrow for successful authorization, and flashing red X three times with "Authorization failed" broadcast for denied access. In free pass mode, a solid green arrow indicates authorization succeeded. The turnstile arms automatically fold down when power is off. It features a circuit breaker for protection and a fan for heat dissipation. The card reader panel reads card information and sends signals to access control, while the card-swiping panel sends signals to the card reader.
Dimensions of the turnstile are 1200.0 mm [47.24 in] in length, 200.0 mm [7.87 in] in width, and 560.0 mm [22.05 in] in height for the top section, and 990.0 mm [38.98 in] in overall height. For installation, expansion bolts of M12 × 120 are used, requiring a hole depth of 95 mm and a diameter of 16 mm.
Cable connections include:
The control board ports include:
The turnstile offers flexible access control modes:
Installation requires careful adherence to safety instructions, including ensuring proper grounding, avoiding use during thunderstorms, and maintaining a minimum distance of 60-100 mm from buildings for maintenance. The turnstile must be installed on a flat, stable surface. For outdoor installations prone to water pooling, a 50-150 mm cement base is required, with the passage elevated to the same height. Silicon sealant should be applied to gaps to prevent water and condensation. PVC pipes for cables must be buried more than 60 mm under the ground, with at least 50 mm above ground, and bent to keep water out.
Commissioning involves setting the work mode, memory mode, and passing mode via DIP switches or a configuration application. Passing time can be set to 5s (default), 10s, 30s, or 60s. The turnstile type can be set to tripod. Voice volume and in/out broadcast can also be configured. Self-checking requires manually pushing the arms down and then lifting them to a level position after a restart.
Regular maintenance is crucial for the turnstile's longevity.
Surface Cleaning:
Interior Cleaning:
Removing Marks and Rust:
Cleaning Requirements:
Detergent Requirements:
General| Brand | Dahua |
|---|---|
| Model | DHI-ASGG520T |
| Category | Turnstiles |
| Language | English |
To Next Page