
Do you have a question about the Dahua HCVR4108C-S3 and is the answer not in the manual?
| Operating System | Embedded LINUX |
|---|---|
| Video Input | 8 channels |
| HDCVI Camera | 1080P/720P HDCVI Camera |
| AHD Camera | 1080P/720P AHD Camera |
| TVI Camera | 1080P/720P TVI Camera |
| IP Camera Input | Yes |
| Audio Out | 1 channel |
| Resolution | 1080p/720p/960H/D1 |
| Record Mode | Manual/Continuous/Motion/Alarm |
| Record Interval | 1-60 minutes |
| Video Output | 1 HDMI, 1 VGA |
| Resolution (HDMI/VGA) | 1920×1080 |
| Display Split | 1/4/8/9 |
| Privacy Masking | Yes |
| OSD | Yes |
| Ethernet | RJ-45 (10/100M) |
| Smart Phone | iPhone, iPad, Android |
| Interoperability | ONVIF compliant |
| Internal HDD | 1x SATA up to 6TB |
| USB Interface | 2x USB 2.0 |
| Power Supply | DC12V/2A |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10~90% RH |
| Video Compression | H.264 |
Detailed technical parameters and specifications for the DVR series, covering various models and their capabilities.
Steps for initial device setup, including booting up, device initialization, password reset, and quick configuration.
Instructions on how to reset the admin password using email or security questions if forgotten.
Configuration of network settings including IP address, subnet mask, default gateway, and DHCP options.
Configuration for video detection types including motion, video loss, tampering, and diagnosis.
Configures motion detection parameters, including region, sensitivity, and period for triggering alarms.
Setup for alarm functions including local, external, IPC, and alarm box configurations.
Setup for Pan-Tilt-Zoom (PTZ) control, including protocol, address, and baud rate configuration.
Enhancing device network security by setting access rights for IP hosts and configuring trusted/blocked sites.
Steps for initial device setup, including setting admin password and security questions.
Instructions on how to reset the admin password using email or security questions if forgotten.











