Need help?Do you have a question about the Dahua HCVR5216A-S3 and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| Video Input Channels | 16 |
| Two-way Talk | Yes |
| Display Split | 1/4/8/9/16 |
| Privacy Masking | Yes |
| OSD | Yes |
| Working Environment | Indoor |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| IP Camera Input | 16 |
| Audio In/Out | 1/1 |
| Recording Resolution | 1080p/720p |
| Record Rate (Main Stream) | 1080p@15fps |
| Record Mode | Manual, Schedule, Motion Detection, Alarm |
| Video Output | HDMI, VGA |
| Resolution | 1920x1080 |
| Ethernet | 1x RJ45 |
| Network Functions | P2P, DDNS, NTP, FTP, Email |
| Max. User Access | 128 |
| Smart Phone | iOS, Android |
| Internal HDD | 1 SATA |
| Max HDD Capacity | 6TB |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12V DC |
| Compression Format | H.264 |
Guides on how to safely install Hard Disk Drives (HDDs) into the DVR unit, including series-specific instructions.
Details the procedures for connecting alarm input and output devices, ensuring proper functionality.
Guides the user through the initial setup process, including boot-up and device initialization.
Covers the configuration of various system parameters, including camera, network, event, storage, and system settings.
Guides the user through the initial setup process for a new device, including password and security questions.
Explains how to access the device interface via a web browser after installation.
Provides methods to reset the admin password using email or security questions if forgotten.
Details the configuration of various device settings, including camera, network, event, storage, and system.
Explains the setup and operation of Pan, Tilt, and Zoom functions for controllable cameras.
To Next Page