Products dept. 张玉良: +86-18958132865 & 692865
5 / 14
Now you can close splicing wall interface and then go back to the main interface. The
splicing wall can be used as a physical screen. It supports 1/4/9/16 split, add/delete
device, open/close all-channel monitor.
Note
The general operation is the same as the physical screen. But for the splicing wall, there
is no playback function and you cannot control the corresponding physical screens of the
splicing wall.
Cancel splicing wall
In the main interface, click the Splice button on the left pane; you can
go to Figure 2. Select a splicing wall first and then click button, you can
remove the selected splicing wall.
Note
The corresponding physical screens are off after you created a splicing wall. After you
delete the splicing wall, the corresponding physical screens are off too.
Tips：Click Info Manager，check and edit corresponding screen Control ID ( The
Control ID would be adopted for network keyboard)
To Next Page
Loading...
