Dahua NVR5432-16P-I User Manual

Local Basic Operations 235
4.11 File Backup
You can back up the record file to the UBS device.
Step 1 Connect USB burner, USB device or portable HDD to the device.
Step 2 Select Main menu > BACKUP, the Backup interface is displayed. See Figure 4-207.
Figure 4-207
Step 3 Select backup device and then set channel, file start time and end time.
Step 4 Click Search button, system begins search. All matched files are listed below. System
automatically calculates the capacity needed and remained.
Step 5 System only backup files with a √ before channel name. You can use Fn or cancel
button to delete √ after file serial number.
Step 6 Click backup button, you can backup selected files. There is a process bar for you
reference.
Step 7 When the system completes backup, you can see a dialogue box prompting successful
backup.
Step 8 Click Backup button, system begins burning. At the same time, the Backup button
becomes Stop button. You can view the remaining time and process bar at the left
bottom.

Dahua NVR5432-16P-I Specifications

General

Model	NVR5432-16P-I
AI by NVR	Yes
AI by Camera	Yes
HDD Bays	4
HDD Interface	SATA
Max. Recording Resolution	12MP
Max. Decoding Capability	16-ch@1080P
Video Output	HDMI, VGA
Network Interface	1 x 10/100/1000 Mbps
PoE	16 Ports
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	-10 °C to +55 °C (+14 °F to +131 °F)
Operating Humidity	10% to 90%
IP Camera Input	32 channels