Dahua NVR5832-I - PTZ Control

Local Basic Operations 107
Parameter
Description
Stop Bits
The default is 1.
Parity
The default is NONE.
Step 3 Click Apply.
4.4.2 PTZ Control
PTZ control panel performs the operations such as directing camera in eight directions,
adjusting zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click on the live view screen and then select PTZ. The PTZ control panel is displayed. See
Figure 4-84.
Figure 4-84
 The gray button means system does not support current function.
 For some series products, the PTZ function is valid in one-window mode.
Table 4-21
Parameter
Description
Speed
Controls the movement speed. The bigger the value is, the faster the
movement will be.
Zoom
: Zoom out.
: Zoom in.
Focus
: Focus far.
: Focus near.
Iris
: Image darker.
: Image brighter.
PTZ movement
Supports eight directions.