Dahua Smart Professional Surveillance System - Playback Device Record

87
SN
Item
Function
4
Playback tool
bar
It is to control the playback process, audio and etc：
 ： Window sync operation button. When this
function is enabled, the operation of the playback
bar is for all windows. When it is in status, it is
for current selected window only.
 ：It is to switch playback and pause.
 ：Stop playback.
 ：Forward.
 ：It is to control the playback speed.
 ：It is to adjust volume.
 : Motion detect the zone.
5
Window display
mode setup
It is to set window split mode. The value ranges from 1-
window to 36-window.
 : Select a window and then click this button to
realize customized setup.
 : Full screen.
6
Time bar
control
It is to zoom in /zoom out time line.
7
Time bar
Playback time process.
8
Time clip
It is to edit the time line to download the specified records.
9
Export process
It is to export the records of the specified period.
4.2.1 Playback Device Record
Please follow the steps listed below to search the record you want and then playback.
1) In Figure 4-7, click Device button on the upper right intergface.
2) Check a channel (or some channels) on the device list on the top right pane.
3) Select record type, stream type and record start time and end time.
4) Click Search. See Figure 4-8.