Need help?Do you have a question about the Daikin Altherma FWXV15AATV3 and is the answer not in the manual?
General| Model | FWXV15AATV3 |
|---|---|
| Category | Heat Pump |
| Power Source | Electric |
| Type | Air to Water |
| Refrigerant | R32 |
| Energy Efficiency Class (Heating) | A++ |
| Sound pressure level (Outdoor) | 50 dBA |
| Noise Level (Indoor Unit) | 35 dB |
| Noise Level (Outdoor Unit) | 50 dB |
| Dimensions (Indoor Unit) | 900 x 320 x 700 mm |
| Dimensions (Outdoor Unit) | 900 x 320 x 700 mm |
Important safety and operational guidelines to follow after unpacking and before initial use of the Daikin unit.
Essential safety precautions concerning electrical and water usage, child supervision, and appliance modification.
Overview of the available Daikin heat pump convector types (FWXV and FWXM) and their size variations.
Key technical specifications for the FWXV/FWXM series, including water content, pressure, temperatures, and power.
Detailed physical dimensions for both FWXV and FWXM series heat pump convectors, presented with diagrams.
Guidelines for optimal placement of the unit, avoiding direct sunlight, heat, dampness, and obstructions.
Details on different mounting phases and considerations for correct installation procedures.
Specifies required clearances around the unit for proper ventilation and operation.
Step-by-step instructions for removing and refitting the upper grill and front panel for internal access.
Instructions on how to remove the side panel of the machine body for access.
Guidance for mounting the FWXV-series units on floors or walls, including bracket installation.
Instructions for installing FWXM-series units horizontally or on ceilings, including condensation drainage.
Details on connecting hydraulic lines, including pipe diameter, insulation, and sealing methods.
Procedures for setting up the condensation discharge network, including inclination and pump requirements.
Steps for filling the hydraulic system, ensuring all valves are open and power is off.
Process for removing air from the hydraulic system during the filling procedure.
Guidelines for making electrical connections, emphasizing safety precautions and proper switch requirements.
Importance of routine maintenance for optimal, safe, and reliable operation of the heat pump convector.
Instructions for cleaning the exterior surfaces of the unit safely and effectively.
Procedure for removing and cleaning the air suction filters to maintain unit efficiency and air quality.
Recommendations for optimizing energy efficiency, such as filter maintenance and managing room conditions.
General advice for handling water leaks or anomalous functioning, and when to contact service.
A comprehensive table listing common effects, their causes, and recommended remedies for troubleshooting.
To Next Page