Daikin Altherma 3 R F+W EBBH11D 6V Series User Manual (English)

Questions and Answers:

P
Preston BellAug 11, 2025
Why am I feeling too cold in my living room with my Daikin Heat Pump?
- T
  Taylor BeckAug 11, 2025
  If you feel too cold, it might be because the desired room temperature is set too low. You can try increasing the desired room temperature. Also, if the problem happens regularly, increase the room temperature preset value. If the desired room temperature still can't be reached, increase the desired leaving water temperature according to your heat emitter type. Finally, it's possible that the weather-dependent curve is set incorrectly, so you may need to adjust it.
W
William ChanAug 19, 2025
Why am I feeling too hot in my living room with my Daikin Heat Pump?
- M
  Matthew RoachAug 19, 2025
  If you feel too hot, it might be because the desired room temperature is set too high. You can try decreasing the desired room temperature. Also, if the problem happens regularly, decrease the room temperature preset value. If the desired room temperature still can't be reached, increase the desired leaving water temperature according to your heat emitter type. Finally, it's possible that the weather-dependent curve is set incorrectly, so you may need to adjust it.
J
Jennifer WrightAug 26, 2025
What to do if my Daikin Altherma 3 R F+W EBBH11D 6V Heat Pump has issues?
- T
  Timothy JonesAug 27, 2025
  If you encounter any issues with your Daikin Heat Pump, you can attempt to resolve them yourself. Alternatively, for any unresolved problems, it's recommended to contact your installer for assistance. The contact or helpdesk number can be found via the user interface.
D
Donna ThomasSep 2, 2025
What to do if my Daikin Altherma 3 R F+W EBBH11D 6V Heat Pump isn't reaching the desired room temperature?
- M
  Makayla StricklandSep 2, 2025
  If the desired room temperature cannot be reached, increase the desired leaving water temperature in accordance with the heat emitter type. Also, the weather-dependent curve could be set incorrectly, so you may need to adjust the weather-dependent curve.