Need help?Do you have a question about the Daikin Altherma 3 R W Series and is the answer not in the manual?
General| Refrigerant | R-32 |
|---|---|
| Type | Air-to-Water Heat Pump |
| Series | Altherma 3 R W |
| Heating Capacity | 4.0 - 16.0 kW |
| Energy Efficiency Ratio (Heating) | A+++ |
| Operating Temperature Range (Heating) | -25°C to +35°C |
Details on the documentation set, including manuals, guides, and addenda for installers.
Essential safety instructions and warnings to be read before installation.
Specific safety warnings and handling requirements for R32 refrigerant.
Covers warnings related to storage, electrical safety, burning, mounting, and piping.
Covers site requirements, R32 unit specifics, and general preparation steps.
Details on allowed installation patterns based on room type and ventilation.
Step-by-step guide for opening and closing the indoor unit for access.
Instructions for securely fixing the indoor unit to the wall bracket.
Covers requirements, insulation, and connection of refrigerant piping.
Details on preparing, connecting, and insulating water piping.
Information on electrical compliance, tightening torques, and general wiring best practices.
Guide to connecting various electrical components to the indoor unit.
Introduction to system configuration and the initial setup wizard.
Setup for language, time, system type, and backup heater configuration.
Configuration for additional zones and domestic hot water tank settings.
Details on weather-dependent curves for optimized heating/cooling.
Covers settings menu, zone configuration, and installer settings overview.
Pre-commissioning checks for wiring, earthing, and component installation.
Procedures for air purging, operation tests, and actuator tests.
Schematic diagram illustrating the indoor unit's piping connections.
Diagram showing the internal wiring and terminal connections of the indoor unit.
To Next Page