Daikin BRC2E52C7 - Page 41

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02
40
Menu Manipulation
Sensing Sensor(Stop)
1
1/2
Energy Saving List
Setpoint Range
Setback Condition
Sensing Sensor(Low)
Sensing Sensor(Stop)
Setpoint Auto Reset
Energy Saving Options
SettingReturn
• Display the Energy Saving Options (See "Energy
Saving List" on page 36).
• Press the
(Up/Down) buttons to select
Sensing Sensor(Stop) and press the Menu/Enter
button.
2
OFF
1 hours
Unocc Stop On/Off:
Unocc Stop Time:
Sensing Sensor(Stop)
SettingReturn
• Press the (Up/Down) buttons to set the
energy saving operation when the sensor detects
the absence.
• Move the cursor using the
(Left/Right)
buttons.
• Press the Menu/Enter button when all changes are
made. The conrmation screen will appear.
3
NoYes
Sensing Sensor(Stop)
Save the settings?
SettingReturn
• Press the (Left/Right) buttons to select Yes .
• Press the Menu/Enter button to conrm the
settings and to return to the Basic Screen.
Operation Method
This function cannot be used when group control is active.
In case of a simultaneous operation system, the system is controlled by the
sensing sensor mounted in the master indoor unit.