1-2
10. Clock time setting
• Press and hold CLOCK button to set the clock time.
11. ON timer setting
• Press the ON TIMER button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER button continuously. If the timer is set to
7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
12. Sleep mode setting
• Press the button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode, the set temperature
is increased by 0.9°F (0.5°C) after the fi rst half an hour, another 0.9°F (0.5°C) after the second half
an hour and 1.8°F (1°C) after the following 1 hour.
13. Temperature setting
• To set the desired room temperature, press the or button to increase or decrease the set
temperature.
• The temperature setting range is from 60.8°F (16°C) to 86.0°F (30°C)
(Optional setting 68.0°F (20°C) to 86.0°F (30°C)).
• Press both buttons and simultaneously to toggle from °C to °F setting.
14. ECO+ function
• Press the button for eco-friendly mode cooling or heating operation.
• Set temperature automatically adjust to eco-friendly level.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
15. LED function
• Press the button to turn on/off the light on ceiling cassette unit.
• Continuosly press the button for 5 seconds to turn on/off the LED display on wall mounted unit.
• Available under HEAT, COOL, DRY, FAN and AUTO modes only.
• When the unit is operating under heating
mode, the set temperature is decreased
by 1.8°F (1°C) after the fi rst half an hour,
another 1.8°F (1°C) after the second half
an hour and 1.8°F (1°C) after the following
1 hour.
• This function is available under COOL,
HEAT and AUTO mode.
+ 3.6 F/2 C
+ 1.8 F/1 C
0 0.5 1 1.5 2
- 1.8 F/1 C
- 3.6 F/2 C
- 5.4 F/3 C
OM-BRC52B-0617(2)-DAIKIN USA.indb 2OM-BRC52B-0617(2)-DAIKIN USA.indb 2 10/30/2017 3:47:04 PM10/30/2017 3:47:04 PM
To Next Page
Loading...
