D2CND024A1AA + D2CND024A4AA + D2TND012A4AA +
D2TND018A4AA + D2TND024A4AA
Wall-mounted condensing boiler
ESIE17-09 / 2017.11
Servicing manual
31
changed and adjusted by users.
and not activate central heating although there is demand.
This value is used when only outside sensor is connect-
-
-
must be higher than “5”.
Domestic hot water setvalue (Same function that can be
-
-
heating mode will not be activated when there is no heat de-
mand.
-
-
demand.
-
a heat demand.
heating mode will not be activated when there is no het de-
mand.
-
therm room thermostat is connected.
Select an index between “00” and “10” with the right dial.
7 Operation
Parame-
ter No
Factory
Range
-
rature
20 10 - 30
none 0 0 - 40
none 0 0 - 1
comfort mode
none 0 0 - 1
DHW set value 50 35 - 60
Set value for the
room thermostat at
day mode
21 10 - 30
Set value for the
room thermostat at
reduced mode
18 10 - 30
Set value for the
day mode
50 30 - 80
Set value for the
reduced mode
35 30 - 80
comfort mode user
none 1
24
-
18 10 - 30
To Next Page
Loading...
