Why do Daikin Control Panel air conditioners continue in heat mode above the temperature limit?
If air conditioners continue to work in heat mode even though the room temperature is higher than the upper limit set by the Temperature Limit function, check the Temperature Limit settings, as the subject indoor units may be controlled by an upper unit with Changeover Option.
Why do Daikin Control Panel air conditioners continue in cool mode below the temperature limit?
If air conditioners continue to work in cool mode even though the room temperature is lower than the lower limit set by the Temperature Limit function, check the Temperature Limit settings, as the subject indoor units may be controlled by an upper unit with Changeover Option.
Why is Daikin DCM601A51 Control Panel pulse port not displayed on PPD setup tool?
If the pulse port is not displayed on the PPD setup tool, register the Pi management point.
Why has Daikin DCM601A51 Control Panel consumed power been distributed with zero operation time?
If consumed power has been distributed even though the operation time for the subject indoor unit is “0”, check the PPD settings. If there is any problem, after consulting with the users, modify settings to not distribute the consumed power while the air conditions are stopped.
Why is Daikin Control Panel consumed power “0” when the indoor unit is operating?
If consumed power is “0” even though the subject indoor unit is operating, check the PPD settings to ensure the operation mode is not fan mode and that the thermostat is not always OFF while the air conditioner is in cool or heat mode.
General| Category | Control Panel |
|---|---|
| Model | DCM601A51 |
| Display | LCD Touchscreen |
| Connectivity | Wired |
| Weight | 0.3 kg |
| Compatibility | Daikin VRV systems |
| Operating Temperature | 0 to 40°C |
To Next Page
