Need help?Do you have a question about the Daikin ERSQ016AAY1 and is the answer not in the manual?
General| Model | ERSQ016AAY1 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 4.5 kW |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R-410A |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Outdoor Unit) | 50 dB |
Provides an overview of the Daikin outdoor heat pump unit.
Outlines the manual's content for installing ERSQ/ERRQ outdoor units.
Explains how to identify the Daikin outdoor unit model numbers.
Guides on choosing the optimal site for outdoor unit installation.
Details crucial installation precautions for safety and performance.
Specifies unit dimensions and required clearances for installation.
Provides guidelines for inspecting, handling, and unpacking the outdoor unit.
Explains procedures and considerations for drain work.
Covers the final steps and precautions for installing the unit.
Details the selection criteria for refrigerant piping materials.
Specifies the correct refrigerant pipe sizes for connections.
Outlines the maximum allowable pipe lengths and height differences.
Explains when and where to install oil traps in refrigerant piping.
Provides instructions and precautions for brazing refrigerant pipes.
Details correct procedures for making flare connections.
Instructions for safely opening, closing, and handling stop valves.
Covers the installation of field refrigerant pipes in four directions.
Advises on sealing openings to prevent entry of foreign objects.
Details the procedures for leak testing and vacuum drying the system.
Offers precautions for connecting piping and applying insulation.
Provides essential details about the R410A refrigerant used.
Explains how to calculate the required additional refrigerant charge.
Details the correct procedure for adding refrigerant to the system.
Lists safety precautions for electrical wiring.
Provides a table of internal components and their wiring designations.
Shows a diagram of the system's field wiring overview.
Highlights precautions for power supply and inter-unit wiring.
Lists specifications for standard wiring components used.
Details the essential checks before starting the unit.
Lists items to check before and after installation.
Guides on performing the test run to ensure proper operation.
Outlines essential safety precautions before performing maintenance.
Describes how to operate the unit in service mode.
To Next Page
