Need help?Do you have a question about the Daikin ER3DAW1 and is the answer not in the manual?
Details dimensions, weight, and connections for the air-cooled condensing units.
Covers power circuit, frequency, voltage, and tolerance requirements.
Lists available optional kits like head pressure control and floor standing.
Identifies key parts of the condensing unit, referencing Figure 1.
Specifies foundation, space, safety, piping length, and wind direction criteria.
Instructions for safe handling, lifting, and transporting the unit.
Procedures for removing from pallet, attaching supports, and leveling.
Details steps for pressurizing, leak testing, and vacuuming the refrigerant lines.
Explains charging R22 refrigerant using cylinder, balance, and manifold.
Instructions for insulating gas and liquid lines with specific material.
Emphasizes licensed electrician, dedicated circuits, and electrical safety.
Specifies cable types, CENELEC designation, and wire connection methods.
Connects power circuit to unit's L1, L2, L3 and N terminals.
Describes cable type and connection for unit intercommunication.
Directs to check and test the complete system before initial start-up.
Provides space for recording manufacturer, model, serial number, and power details.
Outlines the procedure for starting and stopping the air conditioning system.
Covers emergency shutdown, air flow, refrigerant type, and first aid contacts.
To Next Page
General
