D-EIMAC00801-17EN-AR - 21/44
DECLARATION of CONFORMITY
DAIKIN APPLIED EUROPE S.p.A
Via Piani di Santa Maria, 72 - 00072 Ariccia (Roma) Italia
Declares that the Assemblies: EWAQ080 → EWAQ800
(for manufacturing number and manufacturing year refer to unit nameplate)
are conformal to the following Directives:
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment
designed for use within certain voltage limits.DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility.
DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on
machinery, and amending Directive 95/16/EC.
DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 May 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of pressure
equipment.
And to the following harmonized standards/specifications (used in part or whole as described in the
technical construction file):
EN 60204-1:2006+A1:2009 Safety of machinery
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
EN 61000-6-3:2007+A1:2011 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
EN 378-1:2008; EN 378-2:2008+A1:2009; EN 378-4:2008 Safety and environmental requirements; design,
construction, testing, marking and documentation
EN 13136:2001+A1:2005 Methods for calculation pressure relief devices.
For 2014/30/EU Directive the Technical Construction File is: TCF019
According to the Directive 2014/68/EU Module B Certificate TIS-PED-BO-12-01-002251-5261 Rev.001 was issued by
Notified Body 0948 TUV Italia S.r.l. – Via Carducci, 125 – Edificio 23 – 20099 Sesto San Giovanni (MI) - Italy
Technical Construction File: 5048-PED Rev. A
Conformity assessment procedure followed for Directive: Module B + D - Category III
Assembly description of the pressure equipment, according to PED Directive:
Evaporator B+D category III
Safety Valve B+D category IV
Heat Recovery (optional) B+D category II
The Assemblies are in accordance with paragraph d) of Article 5 of the Italian Ministerial Decree n. 329 of 1
st
December
2004 and have been tested to work with the safety devices installed and functioning perfectly.
This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes
components which are added and/or operations carried out subsequently by the final user.
The signatory of this declaration was authorised to compile the technical file, draw up the declaration, to bind and to
enter into commitments on behalf of the manufacturer.
Last two digits of the year in which the CE marking was affixed: 12
Ariccia July 19,
2016
To Next Page
Loading...
