D-EIMWC01008-16EU - 5/20
1. INTRODUCION
The Daikin EWWD J-EWLD J - EWWH J–EWLH J-EWWS J-
EWLS J J packaged water-cooled water chillers are designed
for indoor installation and used for cooling and heating
applications. The EWWD J-EWLD J units are available in 16
standard sizes and for their nominal cooling capacities see
tables. The EWWH J - EWLH J - EWWS J – EWLS J units are
available in 7 standard sizes and for their nominal cooling
capacities see tables.
The present installation manual describes the procedures for
unpacking, installing and connecting the EWWD J–EWLD J
units.
1.1. Technical specifications
(1)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Condenser water inlet/outlet(2) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
Chilled water inlet/outlet(2) (inch)
Liquid line inlet connection(3) (inch)
Gas discharge line connection(3) (inch)
(2) Victaulic
®
coupling
(3) Soldering connection
1.2. Electrical specifications
(1)