Daikin FCQ100C7VEB x 2 - Page 65

Si20-701_B Troubleshooting by Remote Controller
58
Normal status
Enters inspection mode
from normal status when
the INSPECTION/TEST
button is pressed.
1 Press INSPECTION/TEST button.
If no button is
pressed for 1
minute,
equipment
returns to normal
status.
When MODE
selector button is
pressed or no
button is pressed
for 1 minute,
equipment
returns to normal
status.
5 Press MODE selector button.
If no button is
pressed for 1
minute,
equipment
returns to normal
status.
3
Press
MODE
selector
button.
2
46